TechDAS Air Force III + Graham Model 2.2 Arm + SME base

Descrizione

The Graham 2.2 tonearm system has been designed to be the finest available in its field, both in performance and in user convenience.

This convenience begins with the installation itself; the detail of which is to give you all the information you need to do the job properly.

If your turntable has the proper armboard or cutout already made, you should have everything mounted and ready to play in approximately half an hour.

The user-friendliness of the Graham 2.2 tonearm will allow the end user to install the tonearm and cartridge accurately without having to depend on a dealer to perform this function.

Major features of the Air Force III
Fulfils the reproduction of music with a silent background, achieved by thoroughly eliminating unwanted vibration.

Core air control technologies transmitted from the Air Force One:
● Air bearing that lifts up the platter to 30μm
● Vacuum hold-down of the disk
● Decoupling of the disc with air injection

Sits on four height-adjustable feet employing pin point support and lowering the center of gravity.
A high mass main frame that weighs 18kg despite of its small size and made of solid precision cut aluminum.
A high mass platter that weighs 9kg and is also made of solid precision cut aluminum as with the main frame.

Up to 4 short (9″) to long (12″) tonearms can be mounted, made possible by the compact size of the main frame.
Designed to offer flexibility for system upgrades with various accessories, different platter options and an exclusive insulation table to be released shortly.
A ripple free and low vibration silent air pump which has been developed from Air Force one.
Stable and accurate rotation speeds of 33 1/3 and 45 rpm can be achieved free from secular changes or temperature affects by a low rotation motor, where speed is controlled by a high precision oscillation circuit often seen in mobile phones.
Pitch control of ± 0.1 rpm is available for those who have a need for absolute pitch.